Testing and Tagging Commercial Spaces
Commercial testing and tagging services ensure that appliances are safe and ready to use in a commercial environment. New Zealand work safety standards outline requirements for companies to make sure their electrical appliances are safe. One solution is to test and tag your appliances.
Testing and tagging helps to label your appliances as safe at the time of testing. With regular testing companies can help catch faults and then repair or replace the appliance before it can cause any harm.
Testing and tagging doesn’t need to be performed by a registered electrician, but it does need to be carried out by a competent individual with a comprehensive understanding of the standards involved.
Who needs to get their appliances check
If you are operating a business of any kind then it is safe to say that all equipment needs to be electrically safe to use. Failure to ensure the safety of your appliances could cause serious harm or damage to property.Â
Some industries that could benefit from commercial test and tag services are:
- Schools
- Hotels and motels
- Hospitals
- Retail stores
- Industrial businesses
- Other large commercial spaces
What happens if you don’t test and tag
Safety should always be your number 1 priority in your commercial space. Without testing and tagging it can be impossible to know whether or not your appliances are safe. If left alone then unassuming electrical appliances could cause problems. If someone was to be injured then WorkSafe would have no choice to get involved.
Testing and tagging is an effect way to ensure your appliances are compliant. Although not required by law, it helps business maintain their electrical appliances.
How often should you test and tag your commercial space?
Depending on your industry the frequency at which you should test will vary. For example, commercial industries such as mining, construction and demolition are require quarterly testing.
Regular commercial spaces such as an office or store appliances may only need to be tested once or twice a year. Some devices may only need testing every 2-5 years.
The main factor that will influence the frequency at which you test and tag your commercial space is your risk tolerance. If you know your appliances go through a beating throughout the year, it may be safer to test more regularly. Ensuring your electrical appliances are functioning correctly and safely is the point of the regulations after all.
If you own or operate a commercial space and have not tested or tagged your appliances then you are at the mercy of your appliances integrity. Here at Metrotest offer a wide range of test and tag services including testing and tagging commercial spaces.
Once we have tested and tagged your appliances we can schedule regular maintenance to take the headache out of maintaining your electrical appliances.
Call 0800 638 768 or contact us online and get your commercial appliances tested and tagged. Keep your commercial space safe.
Location
Auckland North
Auckland South
Blenheim
Christchurch
Dunedin
Gisborne
Greymouth
Hamilton
Invercargill
Napier/Hastings
Nelson
New Plymouth
Palmerston North
Queenstown
Rotorua
Tauranga
Wellington
Whangarei
Reviews
No Review
Select Your Preferred Date
Book Test and Tag With Metrotest
There are risks and hazards everywhere in life, some are obvious and can be easily seen and others require more investigation to reduce the risk and remove or at least minimise the risk. When it comes to electricity you cannot see it and where it is flowing and this is why it can be so dangerous.
Location
Auckland North
Auckland South
Blenheim
Christchurch
Dunedin
Gisborne
Greymouth
Hamilton
Invercargill
Napier/Hastings
Nelson
New Plymouth
Palmerston North
Queenstown
Rotorua
Tauranga
Wellington
Whangarei
Reviews
Rebecca
2019-05-05 07:32:51
Thomas
2019-05-05 07:25:52
Select Your Preferred Date
Servicing
To keep your test equipment working and giving accurate readings you will need to get a calibration check routinely. We may need to dismantle equipment for this, but often this is not required.
Since the tester has been sent to us for calibration it might be worth getting a medical on it while it’s with us – this we call a ‘Medcal’ ie medical and calibration.
Location
Auckland North
Auckland South
Blenheim
Christchurch
Dunedin
Gisborne
Greymouth
Hamilton
Invercargill
Napier/Hastings
Nelson
New Plymouth
Palmerston North
Queenstown
Rotorua
Tauranga
Wellington
Whangarei
Reviews
John
2019-05-05 07:59:27
Greg
2019-05-05 07:43:25
Select Your Preferred Date
Appliance Tester Calibration
A test instrument, for calibration purposes, could be likened to a piano getting tuned. There are two parts to the process; first the tuner will check the individual keys are in tune and if not, then each will be adjusted to be ‘in tune’.
Location
Auckland North
Auckland South
Blenheim
Christchurch
Dunedin
Gisborne
Greymouth
Hamilton
Invercargill
Napier/Hastings
Nelson
New Plymouth
Palmerston North
Queenstown
Rotorua
Tauranga
Wellington
Whangarei
Reviews
Lola
2019-05-05 08:06:16
Anthony
2019-05-05 08:03:05
Select Your Preferred Date
Repairs
Repairs
We have two facilities set up in New Zealand to repair test equipment that we have supplied. Many people ‘sell’ test equipment, but few repair what they sell, but don’t worry even if your tester was not bought from us often we will still be able to repair it.
Location
Auckland North
Auckland South
Blenheim
Christchurch
Dunedin
Gisborne
Greymouth
Hamilton
Invercargill
Napier/Hastings
Nelson
New Plymouth
Palmerston North
Queenstown
Rotorua
Tauranga
Wellington
Whangarei