Clamps and Digital Multimeters

Multimeters

Multimeters are available everywhere. Some are of good quality, others may be of poor quality and expensive.
We only offer two quality meters, both represent excellent overall value and we guarantee these will meet all the ‘specs on the box’.
One is suited for general electrical use and the other is a high spec meter where more features are required. Both are proven quality meters.

Clamp Meters

Sonel have a range of clamp meters designed to fit the needs of most people from the basic through to TRMS meters available with AC/DC current up to 1000 Amps.
If you are trying to measure leakage current we also have the solution.

  • Clamps and Digital Multimeters

    • CMP-2000 Digital clamp-on multimeter WMXXCMP2000

       
      Universal clamp meter, enabling the maintenance of current measurements up to 2000 A, with the diameter of the clamp as 57 mm, and bus bar to 70 * 18 mm The instrument has an electronic overload protection of all functions and ranges. It provides: AC current measurement (TRUE RMS) up to 1500 A and DC...
    • MD 9240 Power Clamp Meter

       
      The MD 9240 is a high-quality and extremely easy to handle power clamp meter. The current clamp enables TRMS AC current measurement up to 1000A, single-phase power analysis, DC, AC voltage measurement, temperature measurement and more. Key Features DC and TRMS AC voltage up to 600 V TRMS AC current measurement up to 1000 A...
    • MD 9040 TRMS Heavy Duty Industrial Digital multimeter

       
      CAT IV/1000 V overvoltage category and TRMS measurement of AC current and voltage are key features of the MD 9040. That’s why it is particularly suitable for measurements on power supply sources and the most demanding applications in the industrial sector. Its high accuracy, etc. Key Features TRMS DC and AC voltage up to 1000...
    • MD 9230 Current Camp Meter

       
      The MD 9230 is a universal current clamp for measuring DC and TRMS AC voltages up to 600 V and DC and TRMS AC currents up to 1000A. With a broad spectrum of measurement functions and features, it is an ideal tool for service companies and works electricians in the industrial sector Key Features Auto-ranging...
    • MD 9015 Electrical Field Service Digital Multimeter

       
      The digital multimeter MD 9015 includes all necessary functions required to detect and diagnose most electrical and electrotechnical problems. Display with large easily-read figures and one-handed operation make MD 9015 an extremely easy to use. This compact instrument combines a high level of functionality and small size and portability Key Functions AC, DC voltage measurement...
    • CMP-1006 Digital Clamp-on Multimeter WMXXCMP1006

       
      (TRUE RMS) up to 1000 A. Measurement of INRUSH current in start-up phase of electrical device (high frequency of sampling) AC/DC voltage measurement (TRUE RMS) up to 600 V. Resistance measurement and continuity test: continuity test with acoustic signalling (beeper) for resistance below 40. Temperature measurement (Fahrenheit and Celsius units). Frequency measurement. Duty cycle measurement....
    • CMM-40 Industrial Multimeter WMXXCMM40

       
      Industrial multimeter CMM-40 was designed for the purpose of measurements of AC/DC voltage, AC/DC current, resistance, capacitance, frequency (electrical and electronic), duty cycle, temperature and also for testing diodes and continuity. The most important features of CMM-40 are: autoranging/manual range selection, „DATA HOLD” function, for holding measured values, „REL” function, which allows you to make...
    • CMP-400 Digital Clamp-On Multimeter WMXXCMP400

       
      DC current measurement (CMP-401 only) and AC current. AC/DC voltage measurement up to 600 V. Resistance measurement and continuity test: continuity test with acoustic signalling (beeper) for resistance below 50. Temperature measurement (Fahrenheit and Celsius units). Frequency measurement. Diode test. Additionally: safe, insulated measuring clamps, double molded housing, autoranging/manual range selection, DATA HOLD function, for...
    • VT-2 AC Voltage Detector WMXXVT2

       
      The Non-contact AC Voltage Testers are easy to use — just touch the tip to a terminal strip, outlet, or supply cord. When the tip glows red and the unit beeps, you know there’s voltage present. Electricians, maintenance, service, safety, personnel, and homeowners can quickly test for energized circuits in the workplace or at home....
    • P-1 Voltage And Continuity Tester

       
      P-1 Voltage and continuity tester functionality includes: AC/DC voltage indication, Unipolar indication of phase, Circuit continuity check, Phase rotation indication, RCD testing. Specifications Type of insulation: double, EN 61010 – 1 compliant Safety category: III 1000 V (IV 600 V) as per EN 61010 – 1 Housing degree of protection as per EN 60529: IP65...
    • TKF-12 Phase Sequence Tester WMGBTKF12

       
      The TKF-12 tester is a modern high-quality, simple and safe device. However it is recommended to get acquainted with he present manual in order to avoid measuring errors and prevent possible problems related to operation of the meter. Phase sequence indication (direction of field rotation) in the power network with rated phase-to-phase voltage (120…690 V)...
    • TKF-13 Phase Sequence And Motor Rotation Tester WMGBTKF13

       
      The TKF-13 tester is a modern high-quality, simple and safe device. However it is recommended to et acquainted with the present manual in order to avoid measuring errors and prevent possible roblems related to operation of the meter. Specifications Phase sequence indication (direction of field rotation) in the power network with rated phase-to-phase voltage (120…690...
    • P-2 Voltage And Continuity Tester WMGBP2

       
      P-2 Voltage and continuity tester functionality includes: AC/DC voltage measurement and indication Resistance measurement and circuit continuity testing Indication of phase rotation Single pole testing for phase detection RCD testing Specifications AC/DC voltage measurement and indication: on LED bargraf for values: 12, 24, 50, 120, 230, 400, 690 V (indication of voltage with and without...
    • Sonel ERP-1 Adapter

       
      Sonel ERP-1 adapter is used for earth resistance measurements of electricity pylons using flexible clamp – Rogowski coil. Designed to operate with the Sonel’s MRU earth resistance meters, in 3-wire with clamp measurement function. Ergonomic, handy and user friendly design casing makes the measurements of pylons earth resistance quick and easy. The adapter works with...
    • P3 Voltage And Continuity Tester WMGBP3

       
      P-3 can effectively check phase detection, and could be used for resistance measurement & circuit continuity tests. P-3 Voltage and continuity tester functionality includes: AC/DC voltage measurement and indication Resistance measurement and circuit continuity testing Indication of phase rotation Single pole testing for phase detection RCD testing Identification and adjustment of phase Specifications AC/DC voltage...
    • Sonel MMR-630

       
      The MMR-630 Series meters are professional portable instruments for measuring very low resistances. Due to their special measurement algorithm they can be used for both resistive and inductive type of a specimen that makes MMR-630 series perfect instruments for electricians testing electrical junctions, motors and power transformers windings. The results can be stored in the...